ANCHOR SUPPORT
Anchor anchor screw (ground).
Technical specifications have been developed and registered for this product- It is possible to manufacture various versions of the anchor support according to the customer's drawings.(such as ground, petal, etc.)
- The productivity today is 5000 pcs. per month, it is possible to increase productivity, depending on the volume of the order.
- Our products are used in the sinking of mining mines.
The anchorage is frictional.
Designed for fixing the roof of workings.
Used as temporary, prefabricated, lightweight supports in preparatory faces, before the installation of permanent supports, for fixing wire mesh in underground workings, ledges in open-pit mining, as well as for hanging pipes and cable.
The anchor rod is made of a special profile, which is an open round pipe, has a cone on the bottom side, which facilitates the installation of the anchor into the hole, and on the installation side it is equipped with a steel ring. Anchoring of anchor rods in the boreholes is carried out mechanically due to elastic forces bursting the rod in the borehole. Anchors are used in combination with metal pickups and various types of tightening
Used as temporary, prefabricated, lightweight supports in preparatory faces, before the installation of permanent supports, for fixing wire mesh in underground workings, ledges in open-pit mining, as well as for hanging pipes and cable.
The anchor rod is made of a special profile, which is an open round pipe, has a cone on the bottom side, which facilitates the installation of the anchor into the hole, and on the installation side it is equipped with a steel ring. Anchoring of anchor rods in the boreholes is carried out mechanically due to elastic forces bursting the rod in the borehole. Anchors are used in combination with metal pickups and various types of tightening
The anchor support is petal.
The anchorage is wedge-shaped.
Anchor support, accessories.
TODAY WE PRODUCE:
Ground anchorage 30
Outer diameter ⌀nar. 30mm±1
Inner diameter ⌀inner 19mm±1
Thread pitch 30mm±3
Product length 1500, 1800, 2500 mm
Weight 5kg, 6kg, 8kg.
Ground anchorage 38
Outer diameter ⌀nar. 38mm±1
Inner diameter ⌀inner 24mm±1
Thread pitch 30mm±3
Product length 1500, 2000 mm
Weight 7kg, 9kg
And we also manufacture an anchor rod with a screw thread (without a bald head),
an analogue of the GEWI profile and all kinds of thread derivatives from this profile.
an analogue of the GEWI profile and all kinds of thread derivatives from this profile.
Such as:
Anchor steel polymer metric CAS - M with the use of hammered chemical capsules from Fischer
Steel polymer screw anchor CAS - B, with the use of hammered chemical capsules from Fischer
Features:
- The cheapest, in comparison with other anchors of this type
- Easy installation
Polymer ampoule is a cylindrical two-chamber polymer shell containing a polyester composition with a mineral filler and a hardener. The ampoule can be made for both manual and mechanized installation.
They are used for chemical anchoring of anchorage in mining, metro construction, tunnel construction, foundations and other structures.
|
Name (model) |
Dimensions, mm |
Weight, kg |
Diameter of the hole, mm |
|
MSZ3530 |
35х300 |
0,550 |
42 |
|
MSZ3537 |
35х370 |
0,700 |
42 |
|
MSZ3540 |
35х400 |
0,800 |
42 |
|
MSZ2835 |
28х350 |
0,400 |
32 |
|
MSZ2850 |
28х500 |
0,640 |
32 |
|
MSZ2335 |
23х350 |
0,300 |
28 |
|
MSZ2350 |
23х500 |
0,500 |
28 |
Technical specifications:
|
1 |
Compressive strength |
≥ 60 MPa |
|
2 |
Shear strength |
≥ 35 MPa |
|
3 |
Density |
1,9-2,2 g/sm3 |
|
4 |
Shelf life |
< 25°C 3 months |
|
5 |
Operating conditions |
from minus 30°C to plus 60°C |
Curing time depending on the polymer composition:
|
Name (model) |
Curing time |
|
MSCK |
8-40 |
|
MSK |
41-90 |
|
MSZ |
91-180 |
|
MSM |
> 180 |